Level Sensor

The most accurate way to monitor current tank level, is to install a level sensor. The Ultrapro level sensor uses ultrasonic technology to continuously monitor to level. The ultrapro level sensor is constructed in PVDF to stand up in the toughest applications. The level sensor will provide continuous level monitoring for tanks up to 65 feet. The ultrapro level sensor also does not require a fob or usb to program through a cloud based or downloaded software.

The ultrapro level sensor uses push button calibration for easy field installation and trouble shooting. The ultrapro level sensor is completely corrosion resistant making it a great solution for chemical, water or waste water applications. The ultrapro level sensor has a 4-20mA output, which is adjustable- meaning the 4mA signal could be the high level and the 20mA signal could be the low level. The ultrapro level sensor is available in class 1 div 1 for explosion proof applications. The ultrapro level sensor is the easiest level sensor in the market to program, simply push two buttons and you are set up based on point level programming. Point and click the button on the ultrapro level sensor and once you see the light flash you know you have good communication.

The ultrapro level sensor will flash green when it is operating in an excellent condition, and will flash yellow when it is not receiving a return signal. If the ultrapro level sensor does not get a return signal, it may be caused by conditions in the tank. The ultrapro level sensor will not function accurately if there is any foam, vapor, condensation or turbulence in the tank. The ultrapro level sensor works perfectly in applications where the ultrapro level sensor is installed in a plastic bulkhead or flanged fitting on the tank. The ultrapro level sensor has to be pointed straight. If there is any offset of bouncing of the signal the ultrapro level sensor will likely not communicate to the local display or PLC.

The ultrapro level sensor works with any universal displays or PLC / SCADA systems. The ultrapro level sensor can be programmed on a tank, or drum – this will eliminate any measurements or tank dimensional drawings having to be on site. The ultrapro level sensor has automatic temperature compensation which is a standarad feature provided with the ultrapro level sensor. The ultrapro level sensor is available with HART protocol and RS-485 Modbus output. Having a device such as the ultrapro level sensor you have the ability to outfit any tank in your facility.

The ultrapro level sensor is cost effective, and accurate making it a great choice for any end user. The ultrapro level sensor comes with a DIN connection for ease of install and customers can supply their own cable which saves them on install costs. With many different transducer sizes based on the range that the ultrapro level sensor is capable of monitoring, you should also double check your tank fittings to ensure that you can mount the ultrapro level sensor.

Our more products:  Ultrasonic Level Sensor, Liquid Level Probe, Liquid Level Sensor